APPLIED ACOUSTICS SYSTEMS STRINGSTUDIO Bedienungsanleitung PDF herunterladen (Seite 36)

36 Parameters

Rate

There are two ways to adjust the rate, or frequency, of the output of the

LFO module. If the Sync switch is in its off position, the rate is ﬁxed with

the Rate knob. When the Sync switch is on, the frequency of the oscillator

is ﬁxed relative to the frequency (tempo) of the host sequencer or the master

clock (see 4.4.1) in standalone mode. Sync values are adjusted using the Sync

Rate control and range from 1/8 of a quarter note (a thirty-second note) to 16

quarter notes (4 whole notes). The LFO module can also be synced to a triplet

(t) or a dotted note (d). Note that when the Sync control is depressed, the Rate

knob has no effect.

Fade-In

One more feature of the LFO module is the possibility to add a fade-in effect

to its output signal or in other words to set the amount of time necessary for the

amplitude of the LFO signal to grow from zero to its maximum value. The duration of this fade-in

can be adjusted within the range of 0 to 5 seconds, as determined by the Fade knob. Turning this

knob fully to the left results in a value of 0 which is equivalent to removing the fade-in effect. The

time at which the LFO signal is introduced can even be controlled by adding a delay to the fade

in. This parameter can also be set to values varying between 0 and 5 seconds, as determined by the

Delay knob. Note that this knob is effective even if the Fade value is adjusted to zero. In this case,

the signal from the LFO module will simply be delayed.

Time

Delay

Fade in

Amplitude

Figure 20: Fade in feature of the LFO.

4.3 The FX View

The FX view is displayed by clicking on the FX button in the utility section at the top of the

interface and is based around a Multi-effects module.

The Multi-Effects module allows one to process and shape the signal from the synthesizer

before sending it to the output. This module comprises an EQ and a Compressor in series with

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 66 67

Keine Kommentare

APPLIED ACOUSTICS SYSTEMS STRINGSTUDIO Bedienungsanleitung Seite 36